Elliptic curve constructor

AUTHORS:

• William Stein (2005): Initial version
• John Cremona (2008-01): EllipticCurve(j) fixed for all cases

class sage.schemes.elliptic_curves.constructor.EllipticCurveFactory

Bases: sage.structure.factory.UniqueFactory

Construct an elliptic curve.

In Sage, an elliptic curve is always specified by (the coefficients of) a long Weierstrass equation

\[y^2 + a_1 xy + a_3 y = x^3 + a_2 x^2 + a_4 x + a_6.\]

INPUT:

There are several ways to construct an elliptic curve:

• EllipticCurve([a1,a2,a3,a4,a6]): Elliptic curve with given \(a\)-invariants. The invariants are coerced into a common parent. If all are integers, they are coerced into the rational numbers.
• EllipticCurve([a4,a6]): Same as above, but \(a_1=a_2=a_3=0\).
• EllipticCurve(label): Returns the elliptic curve over \(\QQ\) from the Cremona database with the given label. The label is a string, such as "11a" or "37b2". The letters in the label must be lower case (Cremona’s new labeling).
• EllipticCurve(R, [a1,a2,a3,a4,a6]): Create the elliptic curve over \(R\) with given \(a\)-invariants. Here \(R\) can be an arbitrary commutative ring, although most functionality is only implemented over fields.
• EllipticCurve(j=j0) or EllipticCurve_from_j(j0): Return an elliptic curve with \(j\)-invariant j0.
• EllipticCurve(polynomial): Read off the \(a\)-invariants from the polynomial coefficients, see EllipticCurve_from_Weierstrass_polynomial().
• EllipticCurve(cubic, point): The elliptic curve defined by a plane cubic (homogeneous polynomial in three variables), with a rational point.

Instead of giving the coefficients as a list of length 2 or 5, one can also give a tuple.

EXAMPLES:

We illustrate creating elliptic curves:

sage: EllipticCurve([0,0,1,-1,0])
Elliptic Curve defined by y^2 + y = x^3 - x over Rational Field

We create a curve from a Cremona label:

sage: EllipticCurve('37b2')
Elliptic Curve defined by y^2 + y = x^3 + x^2 - 1873*x - 31833 over Rational Field
sage: EllipticCurve('5077a')
Elliptic Curve defined by y^2 + y = x^3 - 7*x + 6 over Rational Field
sage: EllipticCurve('389a')
Elliptic Curve defined by y^2 + y = x^3 + x^2 - 2*x over Rational Field

Old Cremona labels are allowed:

sage: EllipticCurve('2400FF')
Elliptic Curve defined by y^2 = x^3 + x^2 + 2*x + 8 over Rational Field

Unicode labels are allowed:

sage: EllipticCurve(u'389a')
Elliptic Curve defined by y^2 + y = x^3 + x^2 - 2*x over Rational Field

We create curves over a finite field as follows:

sage: EllipticCurve([GF(5)(0),0,1,-1,0])
Elliptic Curve defined by y^2 + y = x^3 + 4*x over Finite Field of size 5
sage: EllipticCurve(GF(5), [0, 0,1,-1,0])
Elliptic Curve defined by y^2 + y = x^3 + 4*x over Finite Field of size 5

Elliptic curves over \(\ZZ/N\ZZ\) with \(N\) prime are of type “elliptic curve over a finite field”:

sage: F = Zmod(101)
sage: EllipticCurve(F, [2, 3])
Elliptic Curve defined by y^2 = x^3 + 2*x + 3 over Ring of integers modulo 101
sage: E = EllipticCurve([F(2), F(3)])
sage: type(E)
<class 'sage.schemes.elliptic_curves.ell_finite_field.EllipticCurve_finite_field_with_category'>
sage: E.category()
Category of schemes over Ring of integers modulo 101

In contrast, elliptic curves over \(\ZZ/N\ZZ\) with \(N\) composite are of type “generic elliptic curve”:

sage: F = Zmod(95)
sage: EllipticCurve(F, [2, 3])
Elliptic Curve defined by y^2 = x^3 + 2*x + 3 over Ring of integers modulo 95
sage: E = EllipticCurve([F(2), F(3)])
sage: type(E)
<class 'sage.schemes.elliptic_curves.ell_generic.EllipticCurve_generic_with_category'>
sage: E.category()
Category of schemes over Ring of integers modulo 95

The following is a curve over the complex numbers:

sage: E = EllipticCurve(CC, [0,0,1,-1,0])
sage: E
Elliptic Curve defined by y^2 + 1.00000000000000*y = x^3 + (-1.00000000000000)*x over Complex Field with 53 bits of precision
sage: E.j_invariant()
2988.97297297297

We can also create elliptic curves by giving the Weierstrass equation:

sage: R2.<x,y> = PolynomialRing(QQ,2)
sage: EllipticCurve(y^2 + y - ( x^3 + x - 9 ))
Elliptic Curve defined by y^2 + y = x^3 + x - 9 over Rational Field

sage: R.<x,y> = GF(5)[]
sage: EllipticCurve(x^3 + x^2 + 2 - y^2 - y*x)
Elliptic Curve defined by y^2 + x*y  = x^3 + x^2 + 2 over Finite Field of size 5

We can also create elliptic curves by giving a smooth plane cubic with a rational point:

sage: R3.<x,y,z> = PolynomialRing(QQ,3)
sage: F = x^3+y^3+30*z^3
sage: P = [1,-1,0]
sage: EllipticCurve(F,P)
Elliptic Curve defined by y^2 - 270*y = x^3 - 24300 over Rational Field

We can explicitly specify the \(j\)-invariant:

sage: E = EllipticCurve(j=1728); E; E.j_invariant(); E.label()
Elliptic Curve defined by y^2 = x^3 - x over Rational Field
1728
'32a2'

sage: E = EllipticCurve(j=GF(5)(2)); E; E.j_invariant()
Elliptic Curve defined by y^2 = x^3 + x + 1 over Finite Field of size 5
2

See trac ticket #6657

sage: EllipticCurve(GF(144169),j=1728)
Elliptic Curve defined by y^2 = x^3 + x over Finite Field of size 144169

Elliptic curves over the same ring with the same Weierstrass coefficients are identical, even when they are constructed in different ways (see trac ticket #11474):

sage: EllipticCurve('11a3') is EllipticCurve(QQ, [0, -1, 1, 0, 0])
True

By default, when a rational value of \(j\) is given, the constructed curve is a minimal twist (minimal conductor for curves with that \(j\)-invariant). This can be changed by setting the optional parameter minimal_twist, which is True by default, to False:

sage: EllipticCurve(j=100)
Elliptic Curve defined by y^2 = x^3 + x^2 + 3392*x + 307888 over Rational Field
sage: E =EllipticCurve(j=100); E
Elliptic Curve defined by y^2 = x^3 + x^2 + 3392*x + 307888 over Rational Field
sage: E.conductor()
33129800
sage: E.j_invariant()
100
sage: E =EllipticCurve(j=100, minimal_twist=False); E
Elliptic Curve defined by y^2 = x^3 + 488400*x - 530076800 over Rational Field
sage: E.conductor()
298168200
sage: E.j_invariant()
100

Without this option, constructing the curve could take a long time since both \(j\) and \(j-1728\) have to be factored to compute the minimal twist (see trac ticket #13100):

sage: E = EllipticCurve_from_j(2^256+1,minimal_twist=False)
sage: E.j_invariant() == 2^256+1
True

create_key_and_extra_args(x=None, y=None, j=None, minimal_twist=True, **kwds)

Return a UniqueFactory key and possibly extra parameters.

INPUT:

See the documentation for EllipticCurveFactory.

OUTPUT:

A pair (key, extra_args):

• key has the form \((R, (a_1, a_2, a_3, a_4, a_6))\), representing a ring and the Weierstrass coefficients of an elliptic curve over that ring;
• extra_args is a dictionary containing additional data to be inserted into the elliptic curve structure.

EXAMPLES:

sage: EllipticCurve.create_key_and_extra_args(j=8000)
((Rational Field, (0, -1, 0, -3, -1)), {})

When constructing a curve over \(\QQ\) from a Cremona or LMFDB label, the invariants from the database are returned as extra_args:

sage: key, data = EllipticCurve.create_key_and_extra_args('389.a1')
sage: key
(Rational Field, (0, 1, 1, -2, 0))
sage: data['conductor']
389
sage: data['cremona_label']
'389a1'
sage: data['lmfdb_label']
'389.a1'
sage: data['rank']
2
sage: data['torsion_order']
1

User-specified keywords are also included in extra_args:

sage: key, data = EllipticCurve.create_key_and_extra_args((0, 0, 1, -23737, 960366), rank=4)
sage: data['rank']
4

Furthermore, keywords takes precedence over data from the database, which can be used to specify an alternative set of generators for the Mordell-Weil group:

sage: key, data = EllipticCurve.create_key_and_extra_args('5077a1', gens=[[1, -1], [-2, 3], [4, -7]])
sage: data['gens']
[[1, -1], [-2, 3], [4, -7]]
sage: E = EllipticCurve.create_object(0, key, **data)
sage: E.gens()
[(-2 : 3 : 1), (1 : -1 : 1), (4 : -7 : 1)]

Note that elliptic curves are equal if and only they have the same base ring and Weierstrass equation; the data in extra_args do not influence comparison of elliptic curves. A consequence of this is that passing keyword arguments only works when constructing an elliptic curve the first time:

sage: E = EllipticCurve('433a1', gens=[[-1, 1], [3, 4]])
sage: E.gens()
[(-1 : 1 : 1), (3 : 4 : 1)]
sage: E = EllipticCurve('433a1', gens=[[-1, 0], [0, 1]])
sage: E.gens()
[(-1 : 1 : 1), (3 : 4 : 1)]

Warning

Manually specifying extra data is almost never necessary and is not guaranteed to have any effect, as the above example shows. Almost no checking is done, so specifying incorrect data may lead to wrong results of computations instead of errors or warnings.

create_object(version, key, **kwds)

Create an object from a UniqueFactory key.

EXAMPLES:

sage: E = EllipticCurve.create_object(0, (GF(3), (1, 2, 0, 1, 2)))
sage: type(E)
<class 'sage.schemes.elliptic_curves.ell_finite_field.EllipticCurve_finite_field_with_category'>

Note

Keyword arguments are currently only passed to the constructor for elliptic curves over \(\QQ\); elliptic curves over other fields do not support them.

sage.schemes.elliptic_curves.constructor.EllipticCurve_from_Weierstrass_polynomial(f)

Return the elliptic curve defined by a cubic in (long) Weierstrass form.

INPUT:

• f – a inhomogeneous cubic polynomial in long Weierstrass form.

OUTPUT:

The elliptic curve defined by it.

EXAMPLES:

sage: R.<x,y> = QQ[]
sage: f = y^2 + 1*x*y + 3*y - (x^3 + 2*x^2 + 4*x + 6)
sage: EllipticCurve(f)
Elliptic Curve defined by y^2 + x*y + 3*y = x^3 + 2*x^2 + 4*x + 6 over Rational Field
sage: EllipticCurve(f).a_invariants()
(1, 2, 3, 4, 6)

The polynomial ring may have extra variables as long as they do not occur in the polynomial itself:

sage: R.<x,y,z,w> = QQ[]
sage: EllipticCurve(-y^2 + x^3 + 1)
Elliptic Curve defined by y^2 = x^3 + 1 over Rational Field
sage: EllipticCurve(-x^2 + y^3 + 1)
Elliptic Curve defined by y^2 = x^3 + 1 over Rational Field
sage: EllipticCurve(-w^2 + z^3 + 1)
Elliptic Curve defined by y^2 = x^3 + 1 over Rational Field

sage.schemes.elliptic_curves.constructor.EllipticCurve_from_c4c6(c4, c6)

Return an elliptic curve with given \(c_4\) and \(c_6\) invariants.

EXAMPLES:

sage: E = EllipticCurve_from_c4c6(17, -2005)
sage: E
Elliptic Curve defined by y^2  = x^3 - 17/48*x + 2005/864 over Rational Field
sage: E.c_invariants()
(17, -2005)

sage.schemes.elliptic_curves.constructor.EllipticCurve_from_cubic(F, P=None, morphism=True)

Construct an elliptic curve from a ternary cubic with a rational point.

If you just want the Weierstrass form and are not interested in the morphism then it is easier to use the function Jacobian() instead. If there is a rational point on the given cubic, this function will construct the same elliptic curve but you do not have to supply the point P.

INPUT:

• F – a homogeneous cubic in three variables with rational coefficients, as a polynomial ring element, defining a smooth plane cubic curve \(C\).
• P – a 3-tuple \((x,y,z)\) defining a projective point on \(C\), or None. If None then a rational flex will be used as a base point if one exists, otherwise an error will be raised.
• morphism – boolean (default: True). If True returns a birational isomorphism from \(C\) to a Weierstrass elliptic curve \(E\), otherwise just returns \(E\).

OUTPUT:

Either (when morphism``=``False) an elliptic curve \(E\) in long Weierstrass form isomorphic to the plane cubic curve \(C\) defined by the equation \(F=0\).

Or (when morphism=True), a birational isomorphism from \(C\) to the elliptic curve \(E\). If the given point is a flex, this is a linear isomorphism.

Note

The function Jacobian() may be used instead. It constructs the same elliptic curve (which is in all cases the Jacobian of \((F=0)\)) and needs no base point to be provided, but also returns no isomorphism since in general there is none: the plane cubic is only isomorphic to its Jacobian when it has a rational point.

Note

When morphism=True, a birational isomorphism between the curve \(F=0\) and the Weierstrass curve is returned. If the point happens to be a flex, then this is a linear isomorphism. The morphism does not necessarily take the given point \(P\) to the point at infinity on \(E\), since we always use a rational flex on \(C\) as base-point when one exists.

EXAMPLES:

First we find that the Fermat cubic is isomorphic to the curve with Cremona label 27a1:

sage: R.<x,y,z> = QQ[]
sage: cubic = x^3+y^3+z^3
sage: P = [1,-1,0]
sage: E = EllipticCurve_from_cubic(cubic, P, morphism=False); E
Elliptic Curve defined by y^2 - 9*y = x^3 - 27 over Rational Field
sage: E.cremona_label()
'27a1'
sage: EllipticCurve_from_cubic(cubic, [0,1,-1], morphism=False).cremona_label()
'27a1'
sage: EllipticCurve_from_cubic(cubic, [1,0,-1], morphism=False).cremona_label()
'27a1'

Next we find the minimal model and conductor of the Jacobian of the Selmer curve:

sage: R.<a,b,c> = QQ[]
sage: cubic = a^3+b^3+60*c^3
sage: P = [1,-1,0]
sage: E = EllipticCurve_from_cubic(cubic, P, morphism=False);  E
Elliptic Curve defined by y^2 - 540*y = x^3 - 97200 over Rational Field
sage: E.minimal_model()
Elliptic Curve defined by y^2 = x^3 - 24300 over Rational Field
sage: E.conductor()
24300

We can also get the birational isomorphism to and from the Weierstrass form. We start with an example where P is a flex and the equivalence is a linear isomorphism:

sage: f = EllipticCurve_from_cubic(cubic, P, morphism=True)
sage: f
Scheme morphism:
  From: Projective Plane Curve over Rational Field defined by a^3 + b^3 + 60*c^3
  To:   Elliptic Curve defined by y^2 - 540*y = x^3 - 97200 over Rational Field
  Defn: Defined on coordinates by sending (a : b : c) to
        (-c : 3*a : 1/180*a + 1/180*b)

sage: finv = f.inverse();  finv
Scheme morphism:
  From: Elliptic Curve defined by y^2 - 540*y = x^3 - 97200 over Rational Field
  To:   Projective Plane Curve over Rational Field defined by a^3 + b^3 + 60*c^3
  Defn: Defined on coordinates by sending (x : y : z) to
        (1/3*y : -1/3*y + 180*z : -x)

Scheme morphism:
  From: Elliptic Curve defined by y^2 + 2*x*y + 20*y = x^3 - x^2 - 20*x - 400/3
        over Rational Field
  To:   Closed subscheme of Projective Space of dimension 2 over Rational Field defined by:
  a^3 + b^3 + 60*c^3
  Defn: Defined on coordinates by sending (x : y : z) to
        (x + y + 20*z : -x - y : -x)

We verify that \(f\) maps the chosen point \(P=(1,-1,0)\) on the cubic to the origin of the elliptic curve:

sage: f([1,-1,0])
(0 : 1 : 0)
sage: finv([0,1,0])
(-1 : 1 : 0)

To verify the output, we plug in the polynomials to check that this indeed transforms the cubic into Weierstrass form:

sage: cubic(finv.defining_polynomials()) * finv.post_rescaling()
-x^3 + y^2*z - 540*y*z^2 + 97200*z^3

sage: E.defining_polynomial()(f.defining_polynomials()) * f.post_rescaling()
a^3 + b^3 + 60*c^3

If the given point is not a flex and the cubic has no rational flexes, then the cubic can not be transformed to a Weierstrass equation by a linear transformation. The general birational transformation is still a birational isomorphism, but is quadratic:

sage: R.<x,y,z> = QQ[]
sage: cubic = x^2*y + 4*x*y^2 + x^2*z + 8*x*y*z + 4*y^2*z + 9*x*z^2 + 9*y*z^2
sage: f = EllipticCurve_from_cubic(cubic, [1,-1,1], morphism=True); f
Scheme morphism:
  From: Projective Plane Curve over Rational Field defined by x^2*y + 4*x*y^2 + x^2*z + 8*x*y*z + 4*y^2*z + 9*x*z^2 + 9*y*z^2
  To:   Elliptic Curve defined by y^2 + 7560/19*x*y + 552960000000/2352637*y = x^3 - 3445200/133*x^2 over Rational Field
  Defn: Defined on coordinates by sending (x : y : z) to
        (2527/17280*x^2 + 133/2160*x*y + 133/108000*y^2 + 133/2880*x*z + 931/18000*y*z - 3857/48000*z^2 : -6859/288*x^2 + 323/36*x*y + 359/1800*y^2 + 551/48*x*z + 2813/300*y*z + 24389/800*z^2 : -2352637/99532800000*x^2 - 2352637/124416000000*x*y - 2352637/622080000000*y^2 + 2352637/82944000000*x*z + 2352637/207360000000*y*z - 2352637/276480000000*z^2)

Note that the morphism returned cannot be evaluated directly at the given point P=(1:-1:1) since the polynomials defining it all vanish there:

sage: f([1,-1,1])
Traceback (most recent call last):
...
ValueError: [0, 0, 0] does not define a valid point since all entries are 0

Using the group law on the codomain elliptic curve, which has rank 1 and full 2-torsion, and the inverse morphism, we can find many points on the cubic. First we find the preimages of multiples of the generator:

sage: E = f.codomain()
sage: E.label()
'720e2'
sage: E.rank()
1
sage: R = E.gens()[0]; R
(-17280000/2527 : 9331200000/6859 : 1)
sage: finv = f.inverse()
sage: [finv(k*R) for k in range(1,10)]
[(-4 : 1 : 0),
(-1 : 4 : 1),
(-20 : -55/76 : 1),
(319/399 : -11339/7539 : 1),
(159919/14360 : -4078139/1327840 : 1),
(-27809119/63578639 : 1856146436/3425378659 : 1),
(-510646582340/56909753439 : 424000923715/30153806197284 : 1),
(-56686114363679/4050436059492161 : -2433034816977728281/1072927821085503881 : 1),
(650589589099815846721/72056273157352822480 : -347376189546061993109881/194127383495944026752320 : 1)]

The elliptic curve also has torsion, which we can map back:

sage: E.torsion_points()
[(-144000000/17689 : 3533760000000/2352637 : 1),
(-92160000/17689 : 2162073600000/2352637 : 1),
(-5760000/17689 : -124070400000/2352637 : 1),
(0 : 1 : 0)]
sage: [finv(Q) for Q in E.torsion_points() if Q]
[(9 : -9/4 : 1), (-9 : 0 : 1), (0 : 1 : 0)]

In this example, the given point P is not a flex but the cubic does have a rational flex, (-4:0:1). We return a linear isomorphism which maps this flex to the point at infinity on the Weierstrass model:

sage: R.<a,b,c> = QQ[]
sage: cubic =  a^3+7*b^3+64*c^3
sage: P = [2,2,-1]
sage: f = EllipticCurve_from_cubic(cubic, P, morphism=True)
sage: E = f.codomain();  E
Elliptic Curve defined by y^2 - 258048*y = x^3 - 22196256768 over Rational Field
sage: E.minimal_model()
Elliptic Curve defined by y^2 + y = x^3 - 331 over Rational Field

sage: f
Scheme morphism:
  From: Projective Plane Curve over Rational Field defined by a^3 + 7*b^3 + 64*c^3
  To:   Elliptic Curve defined by y^2 - 258048*y = x^3 - 22196256768 over Rational Field
  Defn: Defined on coordinates by sending (a : b : c) to
        (b : -48*a : -1/5376*a - 1/1344*c)

sage: finv = f.inverse();  finv
Scheme morphism:
  From: Elliptic Curve defined by y^2 - 258048*y = x^3 - 22196256768 over Rational Field
  To:   Projective Plane Curve over Rational Field defined by a^3 + 7*b^3 + 64*c^3
  Defn: Defined on coordinates by sending (x : y : z) to
        (-1/48*y : x : 1/192*y - 1344*z)

sage: cubic(finv.defining_polynomials()) * finv.post_rescaling()
-x^3 + y^2*z - 258048*y*z^2 + 22196256768*z^3

sage: E.defining_polynomial()(f.defining_polynomials()) * f.post_rescaling()
a^3 + 7*b^3 + 64*c^3

sage: f(P)
(5376 : -258048 : 1)
sage: f([-4,0,1])
(0 : 1 : 0)

It is possible to not provide a base point P provided that the cubic has a rational flex. In this case the flexes will be found and one will be used as a base point:

sage: R.<x,y,z> = QQ[]
sage: cubic = x^3+y^3+z^3
sage: f = EllipticCurve_from_cubic(cubic, morphism=True)
sage: f
Scheme morphism:
  From: Projective Plane Curve over Rational Field defined by x^3 + y^3 + z^3
  To:   Elliptic Curve defined by y^2 - 9*y = x^3 - 27 over Rational Field
  Defn: Defined on coordinates by sending (x : y : z) to
        (y : -3*x : -1/3*x - 1/3*z)

An error will be raised if no point is given and there are no rational flexes:

sage: R.<x,y,z> = QQ[]
sage: cubic = 3*x^3+4*y^3+5*z^3
sage: EllipticCurve_from_cubic(cubic)
Traceback (most recent call last):
...
ValueError: A point must be given when the cubic has no rational flexes

An example over a finite field, using a flex:

sage: K = GF(17)
sage: R.<x,y,z> = K[]
sage: cubic = 2*x^3+3*y^3+4*z^3
sage: EllipticCurve_from_cubic(cubic,[0,3,1])
Scheme morphism:
  From: Projective Plane Curve over Finite Field of size 17 defined by 2*x^3 + 3*y^3 + 4*z^3
  To:   Elliptic Curve defined by y^2 + 16*y = x^3 + 11 over Finite Field of size 17
  Defn: Defined on coordinates by sending (x : y : z) to
        (-x : 4*y : 4*y + 5*z)

An example in characteristic 3:

sage: K = GF(3)
sage: R.<x,y,z> = K[]
sage: cubic = x^3+y^3+z^3+x*y*z
sage: EllipticCurve_from_cubic(cubic,[0,1,-1])
Scheme morphism:
  From: Projective Plane Curve over Finite Field of size 3 defined by x^3 + y^3 + x*y*z + z^3
  To:   Elliptic Curve defined by y^2 + x*y = x^3 + 1 over Finite Field of size 3
  Defn: Defined on coordinates by sending (x : y : z) to
        (y + z : -y : x)

An example over a number field, using a non-flex and where there are no rational flexes:

sage: K.<a> = QuadraticField(-3)
sage: R.<x,y,z> = K[]
sage: cubic = 2*x^3+3*y^3+5*z^3
sage: EllipticCurve_from_cubic(cubic,[1,1,-1])
Scheme morphism:
  From: Projective Plane Curve over Number Field in a with defining polynomial x^2 + 3 with a = 1.732050807568878?*I defined by 2*x^3 + 3*y^3 + 5*z^3
  To:   Elliptic Curve defined by y^2 + 1754460/2053*x*y + 5226454388736000/8653002877*y = x^3 + (-652253285700/4214809)*x^2 over Number Field in a with defining polynomial x^2 + 3 with a = 1.732050807568878?*I
  Defn: Defined on coordinates by sending (x : y : z) to
        (-16424/127575*x^2 - 231989/680400*x*y - 14371/64800*y^2 - 26689/81648*x*z - 10265/27216*y*z - 2053/163296*z^2 : 24496/315*x^2 + 119243/840*x*y + 4837/80*y^2 + 67259/504*x*z + 25507/168*y*z + 5135/1008*z^2 : 8653002877/2099914709760000*x^2 + 8653002877/699971569920000*x*y + 8653002877/933295426560000*y^2 + 8653002877/419982941952000*x*z + 8653002877/279988627968000*y*z + 8653002877/335986353561600*z^2)

An example over a function field, using a non-flex:

sage: K.<t> = FunctionField(QQ)
sage: R.<x,y,z> = K[]
sage: cubic = x^3+t*y^3+(1+t)*z^3
sage: EllipticCurve_from_cubic(cubic,[1,1,-1], morphism=False)
Elliptic Curve defined by y^2 + ((162*t^6+486*t^5+810*t^4+810*t^3+486*t^2+162*t)/(t^6+12*t^5-3*t^4-20*t^3-3*t^2+12*t+1))*x*y + ((314928*t^14+4094064*t^13+23462136*t^12+78102144*t^11+167561379*t^10+243026001*t^9+243026001*t^8+167561379*t^7+78102144*t^6+23462136*t^5+4094064*t^4+314928*t^3)/(t^14+40*t^13+577*t^12+3524*t^11+8075*t^10+5288*t^9-8661*t^8-17688*t^7-8661*t^6+5288*t^5+8075*t^4+3524*t^3+577*t^2+40*t+1))*y = x^3 + ((2187*t^12+13122*t^11-17496*t^10-207765*t^9-516132*t^8-673596*t^7-516132*t^6-207765*t^5-17496*t^4+13122*t^3+2187*t^2)/(t^12+24*t^11+138*t^10-112*t^9-477*t^8+72*t^7+708*t^6+72*t^5-477*t^4-112*t^3+138*t^2+24*t+1))*x^2 over Rational function field in t over Rational Field

sage.schemes.elliptic_curves.constructor.EllipticCurve_from_j(j, minimal_twist=True)

Return an elliptic curve with given \(j\)-invariant.

INPUT:

• j – an element of some field.
• minimal_twist (boolean, default True) – If True and j is in \(\QQ\), the curve returned is a minimal twist, i.e. has minimal conductor. If \(j\) is not in \(\QQ\) this parameter is ignored.

OUTPUT:

An elliptic curve with \(j\)-invariant \(j\).

EXAMPLES:

sage: E = EllipticCurve_from_j(0); E; E.j_invariant(); E.label()
Elliptic Curve defined by y^2 + y = x^3 over Rational Field
0
'27a3'

sage: E = EllipticCurve_from_j(1728); E; E.j_invariant(); E.label()
Elliptic Curve defined by y^2 = x^3 - x over Rational Field
1728
'32a2'

sage: E = EllipticCurve_from_j(1); E; E.j_invariant()
Elliptic Curve defined by y^2 + x*y = x^3 + 36*x + 3455 over Rational Field
1

The minimal_twist parameter (ignored except over \(\QQ\) and True by default) controls whether or not a minimal twist is computed:

sage: EllipticCurve_from_j(100)
Elliptic Curve defined by y^2 = x^3 + x^2 + 3392*x + 307888 over Rational Field
sage: _.conductor()
33129800
sage: EllipticCurve_from_j(100, minimal_twist=False)
Elliptic Curve defined by y^2 = x^3 + 488400*x - 530076800 over Rational Field
sage: _.conductor()
298168200

Since computing the minimal twist requires factoring both \(j\) and \(j-1728\) the following example would take a long time without setting minimal_twist to False:

sage: E = EllipticCurve_from_j(2^256+1,minimal_twist=False)
sage: E.j_invariant() == 2^256+1
True

sage.schemes.elliptic_curves.constructor.EllipticCurves_with_good_reduction_outside_S(S=[], proof=None, verbose=False)

Return a sorted list of all elliptic curves defined over \(Q\) with good reduction outside the set \(S\) of primes.

INPUT:

• S – list of primes (default: empty list)
• proof – boolean (default True): the MW basis for auxiliary curves will be computed with this proof flag
• verbose – boolean (default False): if True, some details of the computation will be output

Note

Proof flag: The algorithm used requires determining all S-integral points on several auxiliary curves, which in turn requires the computation of their generators. This is not always possible (even in theory) using current knowledge.

The value of this flag is passed to the function which computes generators of various auxiliary elliptic curves, in order to find their S-integral points. Set to False if the default (True) causes warning messages, but note that you can then not rely on the set of curves returned being complete.

EXAMPLES:

sage: EllipticCurves_with_good_reduction_outside_S([])
[]
sage: elist = EllipticCurves_with_good_reduction_outside_S([2])
sage: elist
[Elliptic Curve defined by y^2 = x^3 + 4*x over Rational Field,
Elliptic Curve defined by y^2 = x^3 - x over Rational Field,
...
Elliptic Curve defined by y^2 = x^3 - x^2 - 13*x + 21 over Rational Field]
sage: len(elist)
24
sage: ', '.join(e.label() for e in elist)
'32a1, 32a2, 32a3, 32a4, 64a1, 64a2, 64a3, 64a4, 128a1, 128a2, 128b1, 128b2, 128c1, 128c2, 128d1, 128d2, 256a1, 256a2, 256b1, 256b2, 256c1, 256c2, 256d1, 256d2'

Without Proof=False, this example gives two warnings:

sage: elist = EllipticCurves_with_good_reduction_outside_S([11],proof=False)  # long time (14s on sage.math, 2011)
sage: len(elist)  # long time
12
sage: ', '.join(e.label() for e in elist)  # long time
'11a1, 11a2, 11a3, 121a1, 121a2, 121b1, 121b2, 121c1, 121c2, 121d1, 121d2, 121d3'

sage: elist = EllipticCurves_with_good_reduction_outside_S([2,3]) # long time (26s on sage.math, 2011)
sage: len(elist) # long time
752
sage: conds = sorted(set([e.conductor() for e in elist]))  # long time
sage: max(conds) # long time
62208
sage: [N.factor() for N in conds] # long time
[2^3 * 3,
 3^3,
 2^5,
 2^2 * 3^2,
 2^4 * 3,
 2 * 3^3,
 2^6,
 2^3 * 3^2,
 2^5 * 3,
 2^2 * 3^3,
 2^7,
 2^4 * 3^2,
 2 * 3^4,
 2^6 * 3,
 2^3 * 3^3,
 3^5,
 2^8,
 2^5 * 3^2,
 2^2 * 3^4,
 2^7 * 3,
 2^4 * 3^3,
 2 * 3^5,
 2^6 * 3^2,
 2^3 * 3^4,
 2^8 * 3,
 2^5 * 3^3,
 2^2 * 3^5,
 2^7 * 3^2,
 2^4 * 3^4,
 2^6 * 3^3,
 2^3 * 3^5,
 2^8 * 3^2,
 2^5 * 3^4,
 2^7 * 3^3,
 2^4 * 3^5,
 2^6 * 3^4,
 2^8 * 3^3,
 2^5 * 3^5,
 2^7 * 3^4,
 2^6 * 3^5,
 2^8 * 3^4,
 2^7 * 3^5,
 2^8 * 3^5]

sage.schemes.elliptic_curves.constructor.are_projectively_equivalent(P, Q, base_ring)

Test whether P and Q are projectively equivalent.

INPUT:

• P, Q – list/tuple of projective coordinates.
• base_ring – the base ring.

OUTPUT:

Boolean.

EXAMPLES:

sage: from sage.schemes.elliptic_curves.constructor import are_projectively_equivalent
sage: are_projectively_equivalent([0,1,2,3], [0,1,2,2], base_ring=QQ)
False
sage: are_projectively_equivalent([0,1,2,3], [0,2,4,6], base_ring=QQ)
True

sage.schemes.elliptic_curves.constructor.chord_and_tangent(F, P)

Return the third point of intersection of a cubic with the tangent at one point.

INPUT:

• F – a homogeneous cubic in three variables with rational coefficients, as a polynomial ring element, defining a smooth plane cubic curve.
• P – a 3-tuple \((x,y,z)\) defining a projective point on the curve \(F=0\).

OUTPUT:

A point Q such that F(Q)=0, namely the third point of intersection of the tangent at P with the curve F=0, so Q=P if and only if P is a flex.

EXAMPLES:

sage: R.<x,y,z> = QQ[]
sage: from sage.schemes.elliptic_curves.constructor import chord_and_tangent
sage: F = x^3+y^3+60*z^3
sage: chord_and_tangent(F, [1,-1,0])
(-1 : 1 : 0)

sage: F = x^3+7*y^3+64*z^3
sage: p0 = [2,2,-1]
sage: p1 = chord_and_tangent(F, p0);  p1
(5 : -3 : 1)
sage: p2 = chord_and_tangent(F, p1);  p2
(-1265/314 : 183/314 : 1)

sage.schemes.elliptic_curves.constructor.coefficients_from_Weierstrass_polynomial(f)

Return the coefficients \([a_1, a_2, a_3, a_4, a_6]\) of a cubic in Weierstrass form.

EXAMPLES:

sage: from sage.schemes.elliptic_curves.constructor import coefficients_from_Weierstrass_polynomial
sage: R.<w,z> = QQ[]
sage: coefficients_from_Weierstrass_polynomial(-w^2 + z^3 + 1)
[0, 0, 0, 0, 1]

sage.schemes.elliptic_curves.constructor.coefficients_from_j(j, minimal_twist=True)

Return Weierstrass coefficients \((a_1, a_2, a_3, a_4, a_6)\) for an elliptic curve with given \(j\)-invariant.

INPUT:

See EllipticCurve_from_j().

EXAMPLES:

sage: from sage.schemes.elliptic_curves.constructor import coefficients_from_j
sage: coefficients_from_j(0)
[0, 0, 1, 0, 0]
sage: coefficients_from_j(1728)
[0, 0, 0, -1, 0]
sage: coefficients_from_j(1)
[1, 0, 0, 36, 3455]

The minimal_twist parameter (ignored except over \(\QQ\) and True by default) controls whether or not a minimal twist is computed:

sage: coefficients_from_j(100)
[0, 1, 0, 3392, 307888]
sage: coefficients_from_j(100, minimal_twist=False)
[0, 0, 0, 488400, -530076800]

sage.schemes.elliptic_curves.constructor.projective_point(p)

Return equivalent point with denominators removed

INPUT:

• P, Q – list/tuple of projective coordinates.

OUTPUT:

List of projective coordinates.

EXAMPLES:

sage: from sage.schemes.elliptic_curves.constructor import projective_point
sage: projective_point([4/5, 6/5, 8/5])
[2, 3, 4]
sage: F = GF(11)
sage: projective_point([F(4), F(8), F(2)])
[4, 8, 2]

sage.schemes.elliptic_curves.constructor.tangent_at_smooth_point(C, P)

Return the tangent at the smooth point \(P\) of projective curve \(C\).

INPUT:

• C – a projective plane curve.
• P – a 3-tuple \((x,y,z)\) defining a projective point on \(C\).

OUTPUT:

The linear form defining the tangent at \(P\) to \(C\).

EXAMPLES:

sage: R.<x,y,z> = QQ[]
sage: from sage.schemes.elliptic_curves.constructor import tangent_at_smooth_point
sage: C = Curve(x^3+y^3+60*z^3)
sage: tangent_at_smooth_point(C, [1,-1,0])
x + y

sage: K.<t> = FunctionField(QQ)
sage: R.<x,y,z> = K[]
sage: C = Curve(x^3+2*y^3+3*z^3)
sage: from sage.schemes.elliptic_curves.constructor import tangent_at_smooth_point
sage: tangent_at_smooth_point(C,[1,1,-1])
3*x + 6*y + 9*z