Linear codes and ciphers¶
Codes¶
A linear code of length \(n\) is a finite dimensional subspace of \(GF(q)^n\). Sage can compute with linear error-correcting codes to a limited extent. It basically has some wrappers to GAP and GUAVA commands. GUAVA 2.8 is not included with Sage 4.0’s install of GAP but can be installed as an optional package.
Sage can compute Hamming codes
sage: C = codes.HammingCode(GF(3), 3)
sage: C
[13, 10] Hamming Code over GF(3)
sage: C.minimum_distance()
3
sage: C.generator_matrix()
[1 0 0 0 0 0 0 0 0 0 1 2 0]
[0 1 0 0 0 0 0 0 0 0 0 1 2]
[0 0 1 0 0 0 0 0 0 0 1 0 2]
[0 0 0 1 0 0 0 0 0 0 1 1 1]
[0 0 0 0 1 0 0 0 0 0 1 1 2]
[0 0 0 0 0 1 0 0 0 0 2 0 2]
[0 0 0 0 0 0 1 0 0 0 1 2 1]
[0 0 0 0 0 0 0 1 0 0 2 1 1]
[0 0 0 0 0 0 0 0 1 0 2 2 0]
[0 0 0 0 0 0 0 0 0 1 0 1 1]
the four Golay codes
sage: C = codes.GolayCode(GF(3))
sage: C
[12, 6, 6] Extended Golay code over GF(3)
sage: C.minimum_distance()
6
sage: C.generator_matrix()
[1 0 0 0 0 0 2 0 1 2 1 2]
[0 1 0 0 0 0 1 2 2 2 1 0]
[0 0 1 0 0 0 1 1 1 0 1 1]
[0 0 0 1 0 0 1 1 0 2 2 2]
[0 0 0 0 1 0 2 1 2 2 0 1]
[0 0 0 0 0 1 0 2 1 2 2 1]
as well as binary Reed-Muller codes, quadratic residue codes, quasi-quadratic residue codes, “random” linear codes, and a code generated by a matrix of full rank (using, as usual, the rows as the basis).
For a given code, \(C\), Sage can return a generator matrix, a check matrix, and the dual code:
sage: C = codes.HammingCode(GF(2), 3)
sage: Cperp = C.dual_code()
sage: C; Cperp
[7, 4] Hamming Code over GF(2)
[7, 3] linear code over GF(2)
sage: C.generator_matrix()
[1 0 0 0 0 1 1]
[0 1 0 0 1 0 1]
[0 0 1 0 1 1 0]
[0 0 0 1 1 1 1]
sage: C.parity_check_matrix()
[1 0 1 0 1 0 1]
[0 1 1 0 0 1 1]
[0 0 0 1 1 1 1]
sage: C.dual_code()
[7, 3] linear code over GF(2)
sage: C = codes.HammingCode(GF(4,'a'), 3)
sage: C.dual_code()
[21, 3] linear code over GF(4)
For \(C\) and a vector \(v\in GF(q)^n\), Sage can try to decode \(v\) (i.e., find the codeword \(c\in C\) closest to \(v\) in the Hamming metric) using syndrome decoding. As of yet, no special decoding methods have been implemented.
sage: C = codes.HammingCode(GF(2), 3)
sage: MS = MatrixSpace(GF(2),1,7)
sage: F = GF(2); a = F.gen()
sage: v = vector([a,a,F(0),a,a,F(0),a])
sage: c = C.decode_to_code(v, "Syndrome"); c
(1, 1, 0, 1, 0, 0, 1)
sage: c in C
True
To plot the (histogram of) the weight distribution of a code, one can use the matplotlib package included with Sage:
sage: C = codes.HammingCode(GF(2), 4)
sage: C
[15, 11] Hamming Code over GF(2)
sage: w = C.weight_distribution(); w
[1, 0, 0, 35, 105, 168, 280, 435, 435, 280, 168, 105, 35, 0, 0, 1]
sage: J = range(len(w))
sage: W = IndexedSequence([ZZ(w[i]) for i in J],J)
sage: P = W.plot_histogram()
Now type show(P) to view this.
There are several coding theory functions we are skipping entirely.
Please see the reference manual or the file
coding/linear_codes.py for examples.
Sage can also compute algebraic-geometric codes, called AG codes,
via the Singular interface § sec:agcodes. One may also use the AG
codes implemented in GUAVA via the Sage interface to GAP
gap_console(). See the GUAVA manual for more details. {GUAVA}
Ciphers¶
LFSRs¶
A special type of stream cipher is implemented in Sage, namely, a linear feedback shift register (LFSR) sequence defined over a finite field. Stream ciphers have been used for a long time as a source of pseudo-random number generators. {linear feedback shift register}
S. Golomb {G} gives a list of three statistical properties a sequence of numbers \({\bf a}=\{a_n\}_{n=1}^\infty\), \(a_n\in \{0,1\}\), should display to be considered “random”. Define the autocorrelation of \({\bf a}\) to be
In the case where \(a\) is periodic with period \(P\) then this reduces to
Assume \(a\) is periodic with period \(P\).
balance: \(|\sum_{n=1}^P(-1)^{a_n}|\leq 1\).
low autocorrelation:
\[\begin{split}C(k)= \left\{ \begin{array}{cc} 1,& k=0,\\ \epsilon, & k\not= 0. \end{array} \right.\end{split}\](For sequences satisfying these first two properties, it is known that \(\epsilon=-1/P\) must hold.)
proportional runs property: In each period, half the runs have length \(1\), one-fourth have length \(2\), etc. Moveover, there are as many runs of \(1\)’s as there are of \(0\)’s.
A sequence satisfying these properties will be called pseudo-random. {pseudo-random}
A general feedback shift register is a map \(f:{\bf F}_q^d\rightarrow {\bf F}_q^d\) of the form
where \(C:{\bf F}_q^d\rightarrow {\bf F}_q\) is a given function. When \(C\) is of the form
for some given constants \(c_i\in {\bf F}_q\), the map is called a linear feedback shift register (LFSR). The sequence of coefficients \(c_i\) is called the key and the polynomial
is sometimes called the connection polynomial.
Example: Over \(GF(2)\), if \([c_0,c_1,c_2,c_3]=[1,0,0,1]\) then \(C(x) = 1 + x + x^4\),
The LFSR sequence is then
The sequence of \(0,1\)’s is periodic with period
\(P=2^4-1=15\) and satisfies Golomb’s three randomness
conditions. However, this sequence of period 15 can be “cracked”
(i.e., a procedure to reproduce \(g(x)\)) by knowing only 8
terms! This is the function of the Berlekamp-Massey algorithm {M},
implemented as lfsr_connection_polynomial (which produces the
reverse of berlekamp_massey).
sage: F = GF(2)
sage: o = F(0)
sage: l = F(1)
sage: key = [l,o,o,l]; fill = [l,l,o,l]; n = 20
sage: s = lfsr_sequence(key,fill,n); s
[1, 1, 0, 1, 0, 1, 1, 0, 0, 1, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0]
sage: lfsr_autocorrelation(s,15,7)
4/15
sage: lfsr_autocorrelation(s,15,0)
8/15
sage: lfsr_connection_polynomial(s)
x^4 + x + 1
sage: from sage.matrix.berlekamp_massey import berlekamp_massey
sage: berlekamp_massey(s)
x^4 + x^3 + 1
Classical ciphers¶
has a type for cryptosystems (created by David Kohel, who also wrote the examples below), implementing classical cryptosystems. The general interface is as follows:
sage: S = AlphabeticStrings()
sage: S
Free alphabetic string monoid on A-Z
sage: E = SubstitutionCryptosystem(S)
sage: E
Substitution cryptosystem on Free alphabetic string monoid on A-Z
sage: K = S([ 25-i for i in range(26) ])
sage: e = E(K)
sage: m = S("THECATINTHEHAT")
sage: e(m)
GSVXZGRMGSVSZG
Here’s another example:
sage: S = AlphabeticStrings()
sage: E = TranspositionCryptosystem(S,15);
sage: m = S("THECATANDTHEHAT")
sage: G = E.key_space()
sage: G
Symmetric group of order 15! as a permutation group
sage: g = G([ 3, 2, 1, 6, 5, 4, 9, 8, 7, 12, 11, 10, 15, 14, 13 ])
sage: e = E(g)
sage: e(m)
EHTTACDNAEHTTAH
The idea is that a cryptosystem is a map
\(E: KS \to \text{Hom}_\text{Set}(MS,CS)\) where
\(KS\), \(MS\), and \(CS\) are the key space,
plaintext (or message) space, and ciphertext space, respectively.
\(E\) is presumed to be injective, so e.key() returns the
pre-image key.